Check List:KT板打印切割文件设置
1: Artwork size 1200x2400mm, Over size artwork need split to multiple canvas pages1:文件画板尺寸 1200x2400mm,大画面需要拼接的需要放到并列到一起的画板上面比如2.4x2.4M,2.4x3.6M,2.4x4.8M
2: Colour in CMYK not RGB
2:文件色彩需要CMYK模式， RGB色彩模式会有大的色差,， 屏幕显示和墨水打印有差异，对颜色有较高要求的需要打印小样3: Cutting line need Vector path, stroke 1pt in 100% Magenta
3:切割线需要矢量路径，勾线100%M(文件里面有红色勾线的可以用蓝色或者专色作为切割线)(unless artwork have megenta lines can use100%C)
4: Recommend use Adobe lllustrator with 2 Layer, Print layer and cutting layer
3:推荐使用Adobe Al，分开打印和切割图层
Cutting path need optimized, Smooth cutting line get good result.5:5:切割线需要进行优化，外形简单光滑，复杂形状切出来会粗糙和产生额外的切割费用
6: Text is outlined and pictures are embeded, Pic need 1:1 size 200dpi resolution.6:所有文字需要转曲，图片需要嵌入，嵌入的图片需要等大尺寸200dpi分辨率
7: Artwork need have 3mm bleed around cutting path
7:文件需要切割线外有3mm以上出血设置
8: Save Artwork as PDF or Al format, Doc Name as: Foamboard+thickness + Size +Qty +Note8:文件名按照命名规范， 写清楚材料，厚度，尺寸，数量和备注 公司名字，job name 存PDF格式Example: Foamboard 10mm 1200x2400mm Qtyx3 Note Tom Marketing sians. PDF
